INSTALLATION
Removal / installation · Vehicles built from Aug 2008
| 1. INSTALL CURTAIN AIRBAG CUTOFF SWITCH |
![]() ![]() |
Connect the connector.
Engage the 2 claws and the install the curtain airbag cutoff switch.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 3. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).


