INSPECTION
Inspection · Vehicles built from Aug 2008
| INSPECT CURTAIN AIRBAG CUTOFF SWITCH |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (SW) - 4 (E)
Switch is not pressed
10 kΩ or higher
3 (SW) - 4 (E)
Switch is pressed
Below 1 Ω
Check the illumination operation.
Connect the positive (+) lead from the battery to terminal 2 (ILL+) and the negative (-) lead to terminal 1 (ILL-), and then check that the illumination lights up.
- OK:
- Bulb illuminates
