REMOVAL
Removal / installation · Vehicles built from Aug 2008
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE CURTAIN AIRBAG CUTOFF SWITCH |
![]() ![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the curtain airbag cutoff switch.
Disconnect the connector.


