2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2009 – Jul 2012 Aug 2012 – Jul 2014 from Aug 2014


1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY (w/ Secondary Air Injection System)
  1. Install the fuel pump control ECU bracket and ECU bracket to the fuel pump control ECU assembly with the 4 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. Engage the hook to install the fuel pump control ECU assembly to the frame sub-assembly with the 2 bolts.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }

    NOTICE:
    Do not use the fuel pump control ECU assembly if it has been subjected to physical shocks such as being dropped, etc.

  1. A282110
    Connect the fuel pump control ECU assembly connector.

  1. Rotate the lever in the direction of the arrow until a "click" sound is heard.


2. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY (w/o Secondary Air Injection System)
  1. Engage the hook to install the fuel pump control ECU assembly to the frame sub-assembly with the 2 bolts.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }

    NOTICE:
    Do not use the fuel pump control ECU assembly if it has been subjected to physical shocks such as being dropped, etc.

  1. Connect the 2 fuel pump control ECU assembly connectors.

← INSTALLATION (Aug 2012 – Jul 2014)COMPONENTS (from Aug 2014) →