2011-2016 FJ Cruiser · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL NO. 2 TRACTION CONTROL SWITCH (A-TRAC SWITCH)
  1. Attach the 2 claws to install the No. 2 traction control switch (A-TRAC switch).


2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <E> bolts and 2 clips.


3. INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD)

  1. B271482
    Slide the console upper panel garnish toward the front of the vehicle and engage guide.

  1. Engage the claw and clip and install the console upper panel garnish.


4. INSTALL FRONT CONSOLE BOX
  1. Engage the 5 guides and install the front console box.

  1. Install the 4 <H> bolts.


5. INSTALL BOX BOTTOM MAT
  1. Install the box bottom mat.


6. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
  1. Engage the 3 guides and 5 clips and install the console upper rear panel.


7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133896
    Install the shift lever knob.


8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133894
    Install the shift lever knob.


9. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271483
    Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.

  1. Engage the 4 claws and install the parking brake hole cover.

← INSTALLATION (Jul 2007 – Oct 2010)INSTALLATION (from Aug 2012) →