2011-2016 FJ Cruiser · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built from Nov 2012


NOTICE:
A294479
Do not disconnect the hoses indicated in the illustration.


1. INSTALL FUEL MAIN VALVE ASSEMBLY

  1. A223172E02
    Apply a light coat of gasoline to 2 new O-rings and install the 2 O-rings to the fuel main valve assembly.
    Text in Illustration 
    *1
    New O-Ring

  1. Install the fuel main valve assembly to the fuel filter case.

    NOTICE:
    Make sure the O-rings are not cut or pinched during installation.


2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY
  1. Connect the fuel pump with filter assembly wire harness connector to the fuel pump with filter assembly.

  1. A223260E02
    Apply a light coat of gasoline to a new O-ring and install the fuel pump spacer and O-ring to the fuel pump with filter assembly.
    Text in Illustration 
    *1
    New O-Ring
    *2
    Fuel Pump Spacer

  1. A223259E03
    Engage the 5 claws and install the fuel pump with filter assembly to the fuel filter case.
    Text in Illustration 
    *1
    Fuel Filter Case


3. INSTALL NO. 1 FUEL SUB-TANK

  1. A223171
    Engage the 3 claws and install the No. 1 fuel sub-tank to the fuel filter case.

  1. A223170
    Engage the 3 claws.

  1. A294514E01
    Engage the 2 clamps and the claw and connect the jet pump B to the No. 1 fuel sub-tank.
    Text in Illustration 
    *1
    Jet Pump A
    *2
    Jet Pump B

  1. Connect the jet pump A to the No. 1 fuel sub-tank.

  1. Connect the fuel pump with filter assembly connector.


4. INSTALL FUEL SENDER GAUGE ASSEMBLY

  1. A294473
    As shown in the illustration, slide the claw downwards, and install the fuel sender gauge assembly to the No. 1 fuel sub tank.

  1. Connect the fuel sender gauge assembly connector.

← INSPECTION (from Aug 2014)INSTALLATION (from Nov 2012) →