2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

DISPOSAL

Removal / installation · Vehicles built from Aug 2013


1. DISPOSE OF REAR SUSPENSION MEMBER DAMPER ASSEMBLY

  1. C290905E01
    Using a drill or similar tool, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

    A to B:
    30 mm (1.18 in.)

    CAUTION:
    Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

    NOTICE:
    1. Since the discharging gas may cause chips to scatter, cover the drill or similar tool with a piece of cloth when making the hole.
    2. The gas is colorless, odorless and non-poisonous.

← INSTALLATION (from Aug 2013)COMPONENTS (from Jul 2007) →