2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL REAR SUSPENSION MEMBER DAMPER ASSEMBLY
  1. Install the rear suspension member damper assembly to the body with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

    NOTICE:
    1. Install the rear suspension member damper assembly by first temporarily tightening either the left or right side, then fully tightening the other side, and then fully tightening the side that was temporarily tightened.
    2. Do not compress or extend the rear suspension member damper assembly or rotate the rod.

← INSPECTION (from Aug 2013)DISPOSAL (from Aug 2013) →