REMOVAL
Removal / installation · Vehicles built from Aug 2014
| 1.
REMOVE PURGE VSV |
 |
(Click here)
| 2.
REMOVE NO. 2 AIR TUBE |
 |
- Remove the 2 bolts, 2 nuts and No. 2 air tube from the No. 2 emission control valve set and exhaust manifold sub-assembly LH.
Remove the 2 gaskets from the No. 2 air tube.
- NOTICE:
- Be careful not to damage the installation surface of the gaskets.
| 3.
REMOVE NO. 2 EMISSION CONTROL VALVE SET |
 |
- Disconnect the No. 2 emission control valve set connector.
Slide the hose clip and disconnect the air tube assembly from the No. 2 emission control valve set.
- Remove the 3 nuts and No. 2 emission control valve set from the cylinder head cover sub-assembly LH.