Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



CHECK DLC3
  1. Check the DLC3 (Click here).


CHECK INDICATOR


    B267307E01
  1. Turn the ignition switch to ON.
    Text in Illustration  
    *a
    Cruise Main Indicator Light



  2. BE04034E22
  3. Check that the cruise main indicator light illuminates when the cruise control main switch is turned on, and that the indicator light turns off when the main switch is turned off. If the results are not as specified, inspect the cruise main indicator light circuit (Click here).

    HINT:
    While driving with cruise control on, the ECM activates AUTO CANCEL of the cruise control system when a malfunction occurs in one of the following: vehicle speed sensors, stop light switch, or other related parts. When AUTO CANCEL is activated, the cruise main indicator light outputs the blinking pattern shown in the illustration. At the same time, data of the malfunction is stored as a DTC.