Home › DRIVE LINE ยท DIFFERENTIAL › DIFFERENTIAL CARRIER ASSEMBLY (w/ Differential Lock)

DIFFERENTIAL CARRIER ASSEMBLY (w/ Differential Lock) > REMOVAL

for Preparation Click here



1. REMOVE REAR AXLE SHAFT LH
  1. Remove the rear axle shaft LH (Click here).



2. REMOVE REAR AXLE SHAFT RH

HINT:
Use the same procedure as for the LH side.



3. REMOVE PROPELLER SHAFT ASSEMBLY
  1. Remove the propeller shaft assembly (Click here).



4. REMOVE DIFFERENTIAL CARRIER ASSEMBLY


C121153
  1. Remove the 11 nuts and the differential carrier.

    NOTICE:
    Be careful not to damage the contact surface.



5. REMOVE REAR DIFFERENTIAL CARRIER GASKET