Home › DRIVE LINE ยท DIFFERENTIAL › DIFFERENTIAL CARRIER ASSEMBLY (w/o Differential Lock)

DIFFERENTIAL CARRIER ASSEMBLY (w/o Differential Lock) > REMOVAL

for Preparation Click here



1. REMOVE REAR AXLE SHAFT RH
  1. Remove the rear axle shaft RH (Click here).



2. REMOVE REAR AXLE SHAFT LH

HINT:
Use the same procedure as for the LH side.



3. REMOVE REAR PROPELLER SHAFT ASSEMBLY
  1. Remove the rear propeller shaft assembly (Click here).



4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY


C217293
  1. Remove the 10 nuts and the differential carrier.

    NOTICE:
    Be careful not to damage the contact surface.



5. REMOVE REAR DIFFERENTIAL CARRIER GASKET