Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > Cellular Phone Registration Failure, Phone Directory Transfer Failure

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CURRENT CONDITIONS
  1. Proceed to the next step according to the table below.
    Result 
    Result
    Proceed to
    Another "Bluetooth" compatible cellular phone is present.
    A
    Another "Bluetooth" compatible vehicle is present.
    B
    None of the above
    C



B
Go to step 3

C
Go to step 4
A


2.CHECK USING ANOTHER CELLULAR PHONE
  1. Check if the system functions using another "Bluetooth" compatible cellular phone.

    HINT:
    1. Confirm that either the same or a different version of another "Bluetooth" compatible cellular phone complies with the system.
    2. Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.

    OK:
    The system functions.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

USE A "BLUETOOTH" COMPATIBLE CELLULAR PHONE 

3.CHECK USING ANOTHER "BLUETOOTH" COMPATIBLE VEHICLE
  1. Register the cellular phone with another vehicle and check if the system functions normally.

    HINT:
    Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.

    OK:
    The system functions.



NG
USE A "BLUETOOTH" COMPATIBLE CELLULAR PHONE
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)  

4.CHECK CELLULAR PHONE
  1. Check if the cellular phone is "Bluetooth" compatible.

    HINT:
    Some versions of "Bluetooth" compatible cellular phones may not function.

    OK:
    The phone is "Bluetooth" compatible.



NG
USE A "BLUETOOTH" COMPATIBLE CELLULAR PHONE
OK


5.CHECK CELLULAR PHONE
  1. Check if the cellular phone can make a call.

    HINT:
    When the battery is low, registration or directory transfer cannot be done.

    OK:
    Cellular phone can make a call.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)