Home › SUSPENSION & AXLE › SUSPENSION › FRONT LOWER SUSPENSION ARM

FRONT LOWER SUSPENSION ARM > INSTALLATION

for Preparation Click here



1. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM


G020160E01
  1. Align the matchmarks on the No. 2 camber adjust cam and toe adjust cam.

  1. Temporarily tighten the bolt and the nut.

  1. Install the lower ball joint attachment, a new nut and a new cotter pin.

    Torque:
    140 N*m{ 1,428 kgf*cm , 103 ft.*lbf }



    G020159
  1. Install the lower ball joint attachment with the 2 bolts.

    Torque:
    160 N*m{ 1,631 kgf*cm , 118 ft.*lbf }



2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING


C099159
  1. Install the front shock absorber with coil spring, bolt and washer, and temporarily tighten the nut.



3. INSTALL FRONT WHEEL

Torque:
112 N*m{ 1,137 kgf*cm , 82 ft.*lbf }



4. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



5. FULLY TIGHTEN FRONT LOWER SUSPENSION ARM


G020160
  1. Fully tighten the bolt and the nut.

    Torque:
    175 N*m{ 1,785 kgf*cm , 129 ft.*lbf }



6. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING


C099159
  1. Fully tighten the nut.

    Torque:
    95 N*m{ 969 kgf*cm , 70 ft.*lbf }



7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
(Click here)