Home › TRANSMISSION ยท CLUTCH › CLUTCH PEDAL

CLUTCH PEDAL > REMOVAL

for Preparation Click here



1. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
(Click here)


2. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING


F050813
  1. Remove the compression spring.



3. REMOVE CLUTCH PEDAL SUB-ASSEMBLY


C133799
  1. Remove the bolt and nut.

  1. Remove the clutch pedal from the clutch pedal support.



4. REMOVE CLUTCH PEDAL SPRING HOLDER


F051833
  1. Remove the clutch pedal spring holder from the clutch pedal support.



5. REMOVE CLUTCH SWITCH ASSEMBLY (w/ Cruise Control)


C135792
  1. Loosen the lock nut and remove the clutch switch.



6. REMOVE CLUTCH PEDAL STOPPER BOLT (w/o Cruise Control)


C136405
  1. Loosen the lock nut and remove the clutch pedal stopper bolt.



7. REMOVE CLUTCH PEDAL PAD


8. REMOVE CLUTCH PEDAL BUSH


C133801
  1. Remove the 2 bushes from the clutch pedal.



9. REMOVE CLUTCH PEDAL SHAFT COLLAR


C135768
  1. Remove the clutch pedal shaft collar.



10. REMOVE CLUTCH PEDAL NO.1 CUSHION


C135769
  1. Using needle-nose pliers, remove the 3 No. 1 cushions from the clutch pedal.



11. REMOVE CLUTCH PEDAL TURNOVER BUSH


C135770
  1. Remove the clutch pedal turnover bush from the clutch pedal.



12. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH


C135781
  1. Using an 8 mm hexagon wrench and a hammer, remove the clevis bush.