Home › BODY ELECTRICAL › AUDIO / VISUAL › MULTI-MEDIA INTERFACE ECU

MULTI-MEDIA INTERFACE ECU > REMOVAL

for Preparation Click here



1. REMOVE RADIO RECEIVER ASSEMBLY
(Click here)


2. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY


    E220892
  1. Disconnect the clamp and connectors.

  1. Remove the 2 nuts and the multi-media interface ECU.

  1. w/ CRAWL:

    1. Disconnect the connector.



3. REMOVE DRIVING SUPPORT SWITCH CONTROL ECU (w/ CRAWL)


C266323
  1. Remove the nut and the driving support switch control ECU.