FUEL PUMP > REMOVAL |
| 1. REMOVE FUEL TANK ASSEMBLY |
Remove the fuel tank assembly (Click here).
| 2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
![]() |
Set the plate and claws of SST onto the fuel pump gauge retainer and temporarily tighten the bolts.
While firmly pressing the claws of SST against the ribs of the retainer, fully tighten each bolt.
Set SST handle in place.
![]() |
While pressing down tightly on SST to prevent it from rising up, slowly rotate the handle to loosen the retainer.
Remove the retainer.
Remove the fuel suction with pump and gauge tube assembly from the fuel tank.
![]() |
Remove the gasket from the fuel tank.