Home › DRIVE LINE ยท DIFFERENTIAL › DIFFERENTIAL CARRIER OIL SEAL

DIFFERENTIAL CARRIER OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT ASSEMBLY
  1. Remove the propeller shaft assembly (Click here).



2. REMOVE REAR DRIVE PINION NUT


C089309E01
  1. Using SST and a hammer, loosen the staked part of the rear drive pinion nut.

    SST
    09930-00010  

    NOTICE:
    1. Be sure to use SST with the tapered surface facing the shaft.
    2. Do not grind the tip of the SST with a grinder, etc.
    3. Completely loosen the staked part of the nut when removing it.
    4. Do not damage the threads of the drive pinion nut.



    B087842E02
  1. Using SST to hold the companion flange.

    SST
    09330-00021   (09330-00030)

  1. Using a socket wrench (30 mm), remove the rear drive pinion nut.



3. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY


C217281E01
  1. Using SST, remove the rear drive pinion companion flange sub-assembly.

    SST
    09950-30012   (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03040)

    NOTICE:
    Before using SST (center bolt), apply hypoid gear oil to its threads and tip.



4. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL


C217279E01
Text in Illustration 
*1
Oil Seal
*2
Oil Slinger
  1. Using SST, remove the rear differential carrier oil seal.

    SST
    09308-10010  



5. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER


    C216536
  1. Remove the rear differential drive pinion oil slinger.

    NOTICE:
    Apply grease to the threads and tip of the SST center bolt before use.



6. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING


    F044343E01
  1. Using SST, remove the rear drive pinion tapered roller bearing (inner).

    SST
    09556-22010  

    NOTICE:
    Apply grease to the threads and tip of the SST center bolt before use.



    C216535E01
  1. Using SST, tap out the rear drive pinion tapered roller bearing (outer).

    SST
    09308-55010  



7. REMOVE DIFFERENTIAL OIL STORAGE RING


    C217051
  1. Using a screwdriver and hammer, remove the differential oil storage ring.



8. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER