Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides, unless otherwise specified.
  2. The procedure described below is for the LH side.



1. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH (for RH Side)


    B130749
  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Disengage the 10 clips and remove the rear seatback board carpet.



2. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)


    B135127
  1. Pull up the rear seatback.

  1. Remove the bolt and the anchor plate of the rear center seat outer belt.



    B130750
  1. Remove the rear seat inner belt from the rear seatback holder.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Remove the 2 bolts.

  1. Disengage the hook and remove the rear seatback.



3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH (for LH Side)


    B130720
  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. Disengage the 8 clips and remove the rear seatback board carpet.



4. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)


    B130721
  1. Remove the rear center seat inner belt from the rear seatback holder.

  1. Remove the 2 bolts.

  1. Disengage the hook and remove the rear seatback.



5. REMOVE REAR FLOOR BOARD


    B135073E04
  1. Remove the bolt and the luggage hold belt striker.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

    HINT:
    Use the same procedure for both sides.



    B135075
  1. Disengage the clip and the claw and remove the rear floor board.



6. REMOVE REAR FLOOR MAT SUPPORT PLATE


    B130592
  1. Remove the 5 screws.



    B130593
  1. Disengage the 11 claws and remove the rear floor mat support plate.



7. REMOVE REAR FLOOR MAT ASSEMBLY


    B130594
  1. Using a clip remover, remove the 2 clips and the rear floor mat.



8. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY


B179163E03

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Remove the cap.

  1. Remove the bolt and the luggage hold belt striker.



9. REMOVE FRONT DOOR SCUFF PLATE

HINT:
Use the same procedure as for the RH side.



10. REMOVE REAR DOOR SCUFF PLATE

HINT:
Use the same procedure as for the RH side.



11. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

HINT:
Use the same procedure as for the RH side.



12. REMOVE DECK SIDE GARNISH (w/ Woofer)


    B271490
  1. Disengage the 6 claws and remove the rear deck side garnish.



13. REMOVE SPEAKER MOUNTING COVER (w/ Woofer)


    E220885
  1. Disengage the 8 clips and 2 guides and remove the speaker mounting cover.



14. REMOVE AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer)


    E220886
  1. Disconnect the connectors.

  1. Remove the 4 bolts and the amplifier box speaker.



15. REMOVE PACKAGE HOLDER NET HOOK


B271495E01

HINT:
Use the same procedure to remove all the package holder net hooks.

Text in Illustration 
*a
for RH Side without Woofer
*b
for LH Side
  1. Remove the screw and the package holder net hook.



16. REMOVE QUARTER TRIM POCKET TRAY (w/o Woofer)


    B130611
  1. Disengage the 7 claws and remove the quarter trim pocket tray.



17. REMOVE SIDE TRIM COVER (w/o Woofer)


    B267111
  1. Disengage the 6 claws and the 2 guides remove the side trim cover.



18. REMOVE QUARTER TRIM POCKET (w/o Woofer)


    B130613
  1. Disengage the 6 claws and remove the quarter trim pocket.



19. REMOVE LAP BELT OUTER ANCHOR COVER


B130614E04

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Disengage the 3 claws and remove the lap belt outer anchor cover.



20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY

HINT:
Use the same procedure as for the RH side.



21. REMOVE REAR DECK TRIM COVER (w/ Power Outlet Socket)
(Click here)


22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    B130616
  1. Remove the 3 screws and bolt.



    B130617
  1. Disengage the 6 clips and the 8 claws and remove the deck trim side panel.



23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    B130618
  1. Remove the 3 screws.



    B130619
  1. Disengage the 6 clips and the 8 claws and remove the deck trim side panel.



24. REMOVE REAR COMBINATION LIGHT ASSEMBLY


E127201
  1. Remove the 3 nuts.

  1. Disconnect the 3 connectors to remove the rear combination light assembly.