Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › ULTRASONIC SENSOR

ULTRASONIC SENSOR > REMOVAL

for Preparation Click here



1. REMOVE REAR BUMPER COVER
(Click here)


2. REMOVE NO. 1 ULTRASONIC SENSOR


    E185143
  1. Disconnect the connector.



    E185144
  1. Disengage the 2 claws and remove the ultrasonic sensor.



3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    E185146
  1. Disengage the 2 claws and remove the ultrasonic sensor retainer.