Home › ENGINE › 1GR-FE ENGINE CONTROL SYSTEM › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
(Click here)


2. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH
(Click here)


3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    A171113E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold sub-assembly RH.

    SST
    09224-00010  

    NOTICE:
    Do not use an air fuel ratio sensor that has been dropped or subjected to a strong impact.



4. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)


    A171114E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold sub-assembly LH.

    SST
    09224-00010  

    NOTICE:
    Do not use an air fuel ratio sensor that has been dropped or subjected to a strong impact.