Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG CUTOFF SWITCH

CURTAIN SHIELD AIRBAG CUTOFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL CURTAIN AIRBAG CUTOFF SWITCH


B207806
  1. Connect the connector.

  1. Engage the 2 claws and the install the curtain airbag cutoff switch.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



3. INSPECT SRS WARNING LIGHT
  1. Inspect the SRS warning light (Click here).