Home › BRAKE › BRAKE CONTROL › CRAWL SWITCH

CRAWL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE PERSONAL LIGHT ASSEMBLY
(Click here)


2. REMOVE CRAWL CONTROL SWITCH ASSEMBLY


    C266310
  1. Disconnect the 3 connectors from the personal light assembly.



    C266311
  1. Remove the 6 screws from the personal light assembly.



    C266312
  1. Disengage the 4 claws and 2 guides and remove the bulb housing sub-assembly from the personal light assembly.



    C266313
  1. Remove the 4 screws and the crawl control switch assembly from the personal light assembly.