Home › BRAKE › BRAKE › 5L VACUUM PUMP

5L VACUUM PUMP > INSTALLATION

for Preparation Click here



1. INSTALL VACUUM PUMP ASSEMBLY
  1. Install the vacuum pump with the 4 bolts to the generator assembly.

    Torque:
    7.8 N*m{ 80 kgf*cm , 69 in.*lbf }



2. INSTALL GENERATOR W/ VACUUM PUMP ASSEMBLY

HINT:
Refer to the instructions for installation of the generator w/ vacuum pump assembly. (Click here)



3. INSPECT VACUUM PUMP ASSEMBLY
  1. Disconnect the vacuum hose.

  1. Connect the vacuum gauge to the vacuum pump.

  1. Start the engine.



    C106115E01
  1. Measure the vacuum with the engine idling.

    Standard:
    More than 650 mmHg (86.7 kPa).