Home › BRAKE › BRAKE CONTROL › REAR SPEED SENSOR

REAR SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL REAR SPEED SENSOR
  1. Install a new O-ring to the rear speed sensor.



    C102585
  1. Install the rear speed sensor with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    NOTICE:
    Prevent foreign matter from attaching to the sensor tip.

  1. Connect the connector.



2. INSTALL REAR WHEEL

Torque:
100 N*m{ 1,020 kgf*cm , 74 ft.*lbf }



3. CHECK SPEED SENSOR SIGNAL
(Click here)