ECD SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
![]() |
Description for M-OBD
![]() |
| NORMAL MODE AND CHECK MODE |
| 2-TRIP DETECTION LOGIC |
| FREEZE FRAME DATA |
| DLC3 (Data Link Connector 3) |
![]() |
| Symbol | Terminal No. | Name | Reference Terminal | Result | Condition |
| SIL | 7 | Bus "+" line | 5 - Signal ground | Pulse generation | During transmission |
| CG | 4 | Chassis ground | Body ground | 1 Ω or less | Always |
| BAT | 16 | Battery positive | Body ground | 9 to 14 V | Always |
| BATTERY VOLTAGE |
| MIL (Malfunction Indicator Lamp) |
The MIL illuminates when the ignition switch is on and the engine is not running.
The MIL should turn off when the engine is started. If the MIL remains illuminated, the diagnosis system will detect a malfunction or abnormality in the system.