ENGINE FRONT OIL SEAL > INSTALLATION |
| 1. INSTALL TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL |
![]() |
Apply MP grease to a new oil seal lip.
Using SST and a hammer, tap in the oil seal to the depth of 0.5 mm (0.020 in.) from the oil pump case edge.
| 2. INSTALL CRANKSHAFT TIMING PULLEY |
![]() |
Align the pulley set key with the key groove of the timing pulley.
Using SST and a hammer, tap in the timing pulley with the flange side facing inward.
| 3. INSTALL TIMING BELT |