C1428 Motor Circuit Malfunction
Diagnostic trouble codes · Vehicles built from Dec 2017
Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1428 |
With the motor relay and motor fail-safe relay OFF, open or short in motor circuit continues for 2 seconds or more. |
Brake actuator assembly (Motor circuit) |
WIRING DIAGRAM
Refer to DTCs C142B, C146C and C146D (Click here).INSPECTION PROCEDURE
- NOTICE:
- When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information (Click here).
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
- When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information (Click here).
| 1. CHECK HARNESS AND CONNECTOR (GND2 TERMINAL) |
|
|
||||
| OK | ||
| ||
