2014-2019 Hiace · Service Manual SUSPENSION & AXLE

DISPOSAL

Removal / installation · Vehicles built from Oct 2014


1. DISPOSE OF SHOCK ABSORBER ASSEMBLY REAR

  1. C112177E01
    Fully extend the shock absorber rod.

  1. Using a drill, make a hole in the cylinder somewhere between A and B, as shown in the illustration, to discharge the gas inside.

    CAUTION:
    1. Be careful of flying metal shards when drilling. Always use proper safety equipment.
    2. The gas is colorless, odorless and non-poisonous.

← INSTALLATION (from Oct 2014)HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2014 – Dec 2014) →