REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER |
Using a clip remover, remove the 2 clips.

Detach the 4 clips and remove the instrument panel finish lower.
Disconnect each connector.
Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

| 3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1 |
Using a clip remover, remove the 2 clips

Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.
| 4. REMOVE PARKING BRAKE HOLE COVER |
Detach the 6 claws and remove the parking brake hole cover.

Disconnect each connector.
| 5. REMOVE SHIFT LEVER KNOB |
Turn the shift lever knob in the direction indicated by the arrow and remove it.

Text in Illustration *A
for Manual Transmission
*B
for Automatic Transmission
| 6. REMOVE SHIFTING HOLE COVER ASSEMBLY |
for Manual Transmission:

Detach the 6 claws and remove the shifting hole cover assembly.Text in Illustration *A
for Manual Transmission
*B
for Automatic Transmission
for Automatic Transmission:
Detach the 8 claws and remove the shifting hole cover assembly.
| 7. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
Detach the 8 claws and remove the instrument panel finish panel lower center.

Text in Illustration *A
for Manual Transmission
*B
for Automatic Transmission
| 8. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY |
Separate the shift lever from the control cable assembly.

Pull out the control cable assembly locks.

Turn the adjust nut clockwise 180°. While holding the adjust nut, remove the control cable assembly.
| 9. REMOVE SHIFT LEVER ASSEMBLY |
Remove the 4 bolts and shift lever assembly.

