2014-2019 Hiace · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Mar 2016

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL CLUTCH SWITCH ASSEMBLY
  1. Using a 14 mm union nut wrench, install the clutch switch assembly.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).

  1. Connect the clutch switch connector.


2. INSPECT AND ADJUST CLUTCH PEDAL HEIGHT
(Click here)

3. INSTALL NO. 1 AIR DUCT

4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
  1. Attach the 8 claws to install the instrument panel finish panel lower center.


5. INSTALL SHIFTING HOLE COVER ASSEMBLY
  1. for Manual Transmission:
    Attach the 6 claws to install the shifting hole cover assembly.

  1. for Automatic Transmission:
    Attach the 8 claws to install the shifting hole cover assembly.


6. INSTALL SHIFT LEVER KNOB

7. INSTALL PARKING BRAKE HOLE COVER
  1. Attach the 6 claws to install the parking brake hole cover.


8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Attach the 3 claws to instrument panel under cover sub-assembly No. 1.

  1. Install the the 2 clips.


9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
  1. Connect the fuel lid lock control cable and bonnet (hood) control cable assembly to the instrument panel finish lower.

  1. Attach the 4 clips to install the instrument panel finish panel lower.

  1. Install the 2 clips.


10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 47 in.*lbf }


11. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal. (Click here)
← ADJUSTMENT (from Oct 2014)INSTALLATION (Apr 2016 – Dec 2016) →