REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL CLUTCH RELEASE CYLINDER KIT |
Coat a new piston with lithium soap base glycol grease, as shown in the illustration.

Install the piston and a new spring to the cylinder body.

- NOTICE:
- Do not damage the inside of the cylinder body.
- HINT:
- Install the smaller end of the spring to the piston.
Install a new boot to the push rod.
Install the push rod to the cylinder body.
| 2. INSTALL RELEASE CYLINDER BLEEDER PLUG |
Install the bleeder plug to the cylinder body.
- Torque:
- 11 N*m{ 110 kgf*cm , 8 ft.*lbf }
Install the bleeder plug cap to the bleeder plug.
