2014-2019 Hiace · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Mar 2016

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

  1. C102642E02
    Install the clutch release cylinder with the 2 bolts.

    Torque:
    12 N*m{ 120 kgf*cm , 9 ft.*lbf }

    Text in Illustration 
    *A
    for 5L-E, 2TR-FE
    *B
    for 2KD-FTV


2. INSTALL CLUTCH HOSE NO.1

  1. C102641E03
    Using a union nut wrench, install the clutch hose No.1 to the clutch release cylinder (Procedure A).

    Torque:
    23 N*m{ 235 kgf*cm , 17 ft.*lbf }

    Text in Illustration 
    *A
    for 2TR-FE
    *B
    for 5L-E, 2KD-FTV

    NOTICE:
    Use the formula to calculate special torque value for situations where a union nut wrench is combined with a torque wrench (Click here).

  1. Connect the clutch hose No.1 to the bracket with a new clip (Procedure B).

  1. Using a union nut wrench, connect the clutch tube to the clutch hose No.1 (Procedure C).

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque value for situations where a union nut wrench is combined with a torque wrench (Click here).


3. ADD BRAKE FLUID

Fluid:
SAE J1703 or FMVSS No. 116 DOT3 or equivalent


4. BLEED CLUTCH LINE
  1. Fill the brake reservoir tank with brake fluid and bleed the clutch system.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }


5. CHECK FOR BRAKE FLUID LEAKAGE

HINT:
Check for leakage in the clutch system.


6. INSPECT BRAKE FLUID LEVEL IN RESERVOIR
  1. Check the fluid level and add fluid if necessary.

    Fluid:
    SAE J1703 or FMVSS No.116 DOT3 or equivalent

← REASSEMBLY (from Oct 2014)INSTALLATION (Apr 2016 – Dec 2016) →