2014-2019 Hiace · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. INSTALL CLUTCH RELEASE CYLINDER KIT

  1. CL00672
    Coat a new piston with lithium soap base glycol grease, as shown in the illustration.

  1. C114264E01
    Install the piston and a new spring to the cylinder body.

    NOTICE:
    Do not damage the inside of the cylinder body.

    HINT:
    Install the smaller end of the spring to the piston.

  1. Install a new boot to the push rod.

  1. Install the push rod to the cylinder body.


2. INSTALL RELEASE CYLINDER BLEEDER PLUG
  1. Install the bleeder plug to the cylinder body.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

  1. Install the bleeder plug cap to the bleeder plug.

← DISASSEMBLY (from Oct 2014)INSTALLATION (Oct 2014 – Mar 2016) →