DISASSEMBLY
Removal / installation · Vehicles built from Dec 2015
Versions by build date: Oct 2014 – Nov 2015 from Dec 2015
| 1.
REMOVE NO. 4 ENGINE ROOM WIRE (w/ Fog Light) |
 |
Disconnect the 2 fog light connectors.
Detach the 10 clamps and remove the No. 4 engine room wire.


| 2.
REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light) |
 |
- Remove the 2 clips.
Detach the 4 claws and remove the fog light mounting bracket LH.
| 3.
REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 4.
REMOVE FOG LIGHT COVER LH (w/ Fog Light) |
 |
- Detach the 3 claws and remove the fog light cover LH.
| 5.
REMOVE FOG LIGHT COVER RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 6.
REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
|
 |
Detach the 2 claws.
Detach the 2 guides and remove the fog light assembly LH from the fog light mounting bracket LH.
| 7.
REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 8.
REMOVE LOWER RADIATOR GRILLE LH (w/o Fog Light) |
 |
- Remove the 2 clips.
Detach the 4 claws and remove the lower radiator grille LH.
| 9.
REMOVE LOWER RADIATOR GRILLE RH (w/o Fog Light) |
 |
- HINT:
- Use the same procedure described for the LH side.
| 10.
REMOVE FRONT BUMPER HOLE COVER |
 |
- HINT:
- Use the same procedure for both front bumper hole covers.
- Detach the 2 claws and remove the front bumper hole cover.
| 11.
REMOVE LOWER NO. 1 RADIATOR GRILLE |
 |
Detach the 16 claws and remove the lower No. 1 radiator grille.


| 12.
REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for China) |
 |
- Remove the 2 screws.
Detach the 4 claws and remove the front bumper extension mounting bracket.