REASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Nov 2015
Versions by build date: Oct 2014 – Nov 2015 from Dec 2015
| 1. INSTALL LOWER NO. 1 RADIATOR GRILLE |
Attach the 16 claws to install the lower No. 1 radiator grille.
| 2. INSTALL FRONT BUMPER HOLE COVER |
- HINT:
- Use the same procedure for both front bumper hole covers.
Attach the 2 claws to install the front bumper hole cover.
| 3. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
Attach the 2 guides to install the fog light assembly LH to the fog light mounting bracket LH.
Attach the 2 claws.
| 4. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
- HINT:
- Use the same procedure described for the LH side.
| 5. INSTALL FOG LIGHT COVER LH (w/ Fog Light) |
Attach the 3 claws to install the fog light cover LH.
| 6. INSTALL FOG LIGHT COVER RH (w/ Fog Light) |
- HINT:
- Use the same procedure described for the LH side.
| 7. INSTALL FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light) |
Attach the 4 claws to install the fog light mounting bracket LH.
Install the 2 clips.
| 8. INSTALL FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light) |
- HINT:
- Use the same procedure described for the LH side.
| 9. INSTALL LOWER RADIATOR GRILLE LH (w/o Fog Light) |
Attach the 4 claws to install the lower radiator grille LH.
Install the 2 clips.
| 10. INSTALL LOWER RADIATOR GRILLE RH (w/o Fog Light) |
- HINT:
- Use the same procedure described for the LH side.
| 11. INSTALL NO. 4 ENGINE ROOM WIRE (w/ Wire Harness) |
Attach the 10 clamps to install the No. 4 engine room wire.
Connect the 2 fog light connectors.
