2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. REMOVE BATTERY SERVICE HOLE COVER

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT DOOR SCUFF PLATE RH

4. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Hi-back Seat Type (Click here)
  2. for Low-back Seat Type (Click here)
  3. for Split Bench Seat Type (Click here)

5. REMOVE ECM
  1. Fold back the floor carpet.

  1. A314043
    Remove the 3 bolts and disconnect the ECM.

  1. A314041E01
    Detach the 2 wire harness clamps from the No. 1 ECM bracket and No. 2 ECM bracket.
    Text in Illustration 
    *a
    Push
    *b
    Lock

  1. Disconnect the 2 ECM connectors and remove the ECM.

    NOTICE:
    After disconnecting a ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.


    1. Raise the 2 levers while pushing the locks on the 2 levers and disconnect the 2 ECM connectors.

    2. Remove the ECM.


6. REMOVE NO. 1 ECM BRACKET

  1. A314044
    Remove the 3 screws and No. 1 ECM bracket.


7. REMOVE NO. 2 ECM BRACKET

  1. A314045
    Remove the 2 screws and No. 2 ECM bracket.

← COMPONENTS (from Oct 2014)REMOVAL (from Jan 2017) →