2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Oct 2014 – Nov 2017

Versions by build date: Oct 2014 – Nov 2017 from Dec 2017


1. REMOVE FRONT SEAT ASSEMBLY RH
(Click here)

2. REMOVE FRONT DOOR SCUFF PLATE RH

3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY
  1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.


4. REMOVE FAN AND GENERATOR V BELT

  1. A102135E01
    Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.

    NOTICE:
    When removing the fan and generator V belt, do not use the bolt of the idle pulley.

    HINT:
    After removing the fan and generator V belt, move the tensioner upward to the maximum amount.


5. REMOVE TENSIONER PULLEY

NOTICE:
Perform the following procedure when it is necessary to replace the tensioner pulley.

  1. A245347
    Remove the bolt, dust seal, tensioner pulley.

← COMPONENTS (from Dec 2017)REMOVAL (from Dec 2017) →