2014-2019 Hiace · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017

NOTICE:
Do not try to remove the nylon tube as it is welded to the fuel suction with pump and gauge tube assembly (Click here).


1. REMOVE FUEL SENDER GAUGE ASSEMBLY

  1. A102703E01
    Disconnect the fuel pump harness connector and fuel sender gauge connector.

  1. A309368E01
    Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly upward to remove it.
    Text in Illustration 
    V100135
    Press down
    V100136
    Slide


2. REMOVE NO. 1 FUEL SUB-TANK

  1. A309370E01
    Disconnect the jet pump from the No. 1 fuel sub-tank.
    Text in Illustration 
    *1
    Jet Pump

  1. Detach the claw and 2 clamps from the No. 1 fuel sub-tank.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.

  1. A309371
    Using a screwdriver with its tip wrapped in protective tape, detach the 5 claws to remove the No. 1 fuel sub-tank.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.


3. REMOVE FUEL PUMP

  1. A309404
    Using a screwdriver with its tip wrapped in protective tape, detach the 5 claws to remove the fuel pump from the fuel filter assembly.

    NOTICE:
    Do not damage the fuel filter assembly.

  1. Disconnect the fuel pump harness connector from the fuel pump.

  1. Remove the O-ring from the fuel pump.

← REMOVAL (from Jan 2017)DISASSEMBLY (Jan 2015 – Dec 2016) →