2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017


1. DRAIN ENGINE COOLANT

CAUTION:
Do not remove the radiator reservoir cap sub-assembly while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

HINT:
Collect the engine coolant in a container and dispose of it according to the local regulations.

  1. Loosen the radiator drain cock plug and drain the engine coolant.

    A340634E01

    Text in Illustration 
    *1
    Radiator Reservoir Cap Sub-assembly
    *2
    Radiator Reservoir Assembly
    *3
    Radiator Drain Cock Plug
    *4
    Cylinder Block Water Drain Cock Plug
    *5
    2-Way
    -
    -

  1. Remove the radiator reservoir cap sub-assembly.

  1. Loosen the cylinder block water drain cock plug and drain the engine coolant from the engine.


2. REMOVE FAN AND GENERATOR V BELT
(Click here)

3. DISCONNECT VANE PUMP ASSEMBLY

  1. A102130E01
    Disconnect the oil pressure switch connector.

  1. Remove the 2 bolts and disconnect the vane pump assembly from the engine.

  1. Support the vane pump assembly securely.


4. DISCONNECT WATER INLET

  1. A087301
    Remove the 2 nuts and bolt and disconnect the water inlet.

  1. Remove the gasket.


5. REMOVE THERMOSTAT

  1. A086841J01
    Remove the thermostat and gasket.

← REMOVAL (Jan 2015 – Dec 2016)INSTALLATION (Oct 2014 – Dec 2014) →