2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017

HINT:
Perform "Inspection After Repairs" after replacing the Air fuel ratio sensor (Click here).


1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

HINT:
Perform "Inspection After Repairs" after replacing the Air fuel ratio sensor (Click here).

  1. A310242E01
    Using SST, install the air fuel ratio sensor to the front exhaust pipe assembly.
    SST
    09224-00010  

    Torque:
    without SST:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }
    with SST:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf }

    Text in Illustration 
    *a
    Fulcrum Length

    HINT:
    1. Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). If using a torque wrench with a length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification (Click here).
    2. Make sure SST and the wrench are connected in a straight line.

  1. Connect the air fuel ratio sensor connector.

← INSTALLATION (Apr 2016 – Dec 2016)COMPONENTS (from Oct 2014) →