INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL OXYGEN SENSOR |
Install oxygen sensor (w/ secondary air injection system).
Using SST, install the oxygen sensor to the exhaust pipe assembly front.

- SST
- 09224-00010
- Torque:
- 40 N*m{ 408 kgf*cm , 30 ft.*lbf }
Connect the oxygen sensor connector.
Install oxygen sensor (w/o secondary air injection system).
Using SST, install the oxygen sensor to the exhaust pipe assembly front.

- SST
- 09224-00010
- Torque:
- 40 N*m{ 408 kgf*cm , 30 ft.*lbf }
Connect the oxygen sensor connector.
| 2. REMOVE ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2) |
Install the engine under cover No.2 together with the engine side under cover LH and engine side under cover RH (for Wide Body).
- Torque:
- 13 N*m{ 133 kgf*cm , 10 ft.*lbf }
