REMOVAL
Removal / installation · Vehicles built from Jan 2015
Versions by build date: Oct 2014 – Dec 2014 from Jan 2015
| 1.
DRAIN ENGINE OIL |
 |
Remove the oil filler cap.
Remove the oil drain plug and drain the engine oil from the oil pan sub-assembly.
- NOTICE:
- Collect the oil in a disposable oil container.
Clean the oil pan drain plug and install it with a new gasket.
-
Torque:
- 38 N*m{
382 kgf*cm
, 28 ft.*lbf
}
| 2.
REMOVE ENGINE UNDER COVER NO. 2 (for Narrow Body, w/ Engine Under Cover No. 2) |
|
| 3.
REMOVE ENGINE SIDE UNDER COVER RH (for Wide Body, w/ Engine Side Under Cover RH) |
|
| 4.
REMOVE OIL FILTER SUB-ASSEMBLY (for Type A) |
 |
- Using SST, remove the oil filter sub-assembly.
- SST
- 09228-07501
| 5.
REMOVE OIL FILTER ELEMENT (for Type B) |
 |
- Connect a hose with an inside diameter of 15 mm (0.591 in.) to the oil filter drain pipe.
Text in Illustration
*a
|
Oil Filter Drain Pipe
|
*b
|
Hose
|
- Remove the oil filter drain plug from the oil filter cap.
- NOTICE:
- Do not remove the O-ring (for drain plug).
- Install the pipe to which the hose was attached to the oil filter cap.
Text in Illustration
*1
|
Oil Filter Cap
|
*2
|
O-Ring (for Drain Plug)
|
*a
|
Pipe
|
*b
|
Valve
|
- NOTICE:
- Insert the pipe with O-ring (for drain plug) attached to the oil filter cap side.
- HINT:
- Use a container to catch the draining engine oil.
- Check that the engine oil has been drained and remove the pipe and O-ring (for drain plug).
- HINT:
- Remove the pipe in the direction indicated by the arrows shown in the illustration.
Apply a light coat of engine oil to a new O-ring (for drain plug) and install it to the oil filter drain plug.
Install the oil filter drain plug to the oil filter cap.
-
Torque:
- 13 N*m{
127 kgf*cm
, 9 ft.*lbf
}
- Using SST, remove the oil filter cap.
- SST
- 09228-06501
- Remove the oil filter element and O-ring (for cap) from the oil filter cap.
Text in Illustration
*1
|
Oil Filter Element
|
*2
|
Oil Filter Cap
|
*3
|
O-Ring (for Cap)
|