REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1.
REMOVE THERMOSTAT |
 |
(Click here)
| 2.
REMOVE NO. 1 WATER BY-PASS PIPE |
 |
- Remove the 2 bolts and No. 1 water by-pass pipe from the engine water pump assembly.
Remove the gasket from the No. 1 water by-pass pipe.
| 3.
DISCONNECT NO. 1 TURBO WATER HOSE |
 |
- Slide the clamp and disconnect the No. 1 turbo water hose from the engine water pump assembly.
| 4.
REMOVE ENGINE WATER PUMP ASSEMBLY |
 |
- Remove the 8 bolts, engine water pump assembly and gasket from the timing chain case assembly.