CD cannot be Inserted / Played or CD is Ejected Right After Insertion
Circuit diagnosis · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
INSPECTION PROCEDURE
| 1. CHECK IF A PROPER CD IS INSERTED |
Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.
- OK:
- CD is normal.
- HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CDs with adhesive paper labels should not be played.
- Commercial audio CDs can be played.
- CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
- MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.
- For details on playable CDs, refer to Owner's Manual.
- Translucent or uniquely-shaped CDs cannot be played.
|
|
||||
| OK | |
| 2. CHECK THAT CD IS INSERTED PROPERLY |
Check if the CD is inserted upside down.
- OK:
- CD is properly inserted.
|
|
||||
| OK | |
| 3. CHECK CD |
Clean the CD by wiping it with a soft cloth from the inside to the outside in a radial direction.

- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or antistatic preservative.
|
|
||||
| OK | ||
| ||
| 4. REPLACE CD WITH ANOTHER AND RECHECK |
Replace the CD with a known good one and check that the malfunction disappears.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
