CD Sound Skips
Circuit diagnosis · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
INSPECTION PROCEDURE
| 1. CHECK CD |
 |
- Check the CD.
- OK:
- The CD is clean.
- NOTICE:
- Do not use a conventional record cleaner or antistatic preservative.
- HINT:
- If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK CD |
 |
- Check that the CD is not deformed or cracked.
- OK:
- No deformation or cracks on the CD.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. REPLACE OPERATION USING ANOTHER CD |
 |
Check if the problem recurs using another CD.
- OK:
- The problem does not occur.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 4. CHECK RADIO RECEIVER ASSEMBLY |
 |
Check that the radio receiver assembly is properly installed.
- OK:
- Radio receiver assembly is properly installed.
|
NG |
 |
|
| REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY |
|
|
| OK |
|
 |
|
|