2014-2019 Hiace · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jan 2015


1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. C295035
    Disconnect the park/neutral position switch connector.

  1. C320637
    Using a screwdriver, pry out the lock washer.

  1. Remove the nut and lock washer.

  1. Remove the bolt and park/neutral position switch from the automatic transmission assembly.

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.

← ON-VEHICLE INSPECTION (from Jan 2015)INSPECTION (from Jan 2015) →