2014-2019 Hiace · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jan 2015


INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. C197712E56
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    4 (B) - 5 (L)
    Shift lever in P or N
    Below 1 Ω
    2 (RB) - 6 (PL)
    Shift lever in P
    Below 1 Ω
    2 (RB) - 1 (RL)
    Shift lever in R
    Below 1 Ω
    2 (RB) - 9 (NL)
    Shift lever in N
    Below 1 Ω
    2 (RB) - 7 (DL)
    Shift lever in D, S, "+" or "-"
    Below 1 Ω
    4 (B) - 5 (L)
    Shift lever not in P or N
    10 kΩ or higher
    2 (RB) - 6 (PL)
    Shift lever not in P
    10 kΩ or higher
    2 (RB) - 1 (RL)
    Shift lever not in R
    10 kΩ or higher
    2 (RB) - 9 (NL)
    Shift lever not in N
    10 kΩ or higher
    2 (RB) - 7 (DL)
    Shift lever not in D, S, "+" or "-"
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Park/Neutral Position Switch Assembly)
    If the resistance value is not as specified, replace the park/neutral position switch assembly.

← REMOVAL (from Jan 2015)ADJUSTMENT (from Jan 2015) →