2014-2019 Hiace · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built Jan 2015 – Dec 2016

Versions by build date: Jan 2015 – Dec 2016 from Jan 2017


1. INSTALL TRANSMISSION CASE GASKET
  1. Install 2 new transmission case gaskets to the automatic transmission case sub-assembly.


2. INSTALL MANUAL VALVE
  1. Coat the manual valve with ATF and install it to the transmission valve body assembly.


3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

  1. C318919E01
    Insert the manual valve lever sub-assembly into the groove on the end of the manual valve and install the transmission valve body assembly to the automatic transmission case sub-assembly with the 12 bolts.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

    Text in Illustration 
    *1
    Manual Valve Lever Sub-assembly
    *2
    Manual Valve

    HINT:
    Bolt length:
    1. Bolt A: 25 mm (0.984 in.)
    2. Bolt A: 36 mm (1.42 in.)
    3. Bolt A: 50 mm (1.97 in.)

  1. Install the detent spring and detent spring cover to the transmission valve body assembly with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }


4. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
  1. Coat a new O-ring with ATF, and install it to the valve body oil strainer assembly.

  1. Install the valve body oil strainer assembly to the transmission valve body assembly with the 3 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }


5. CONNECT TRANSMISSION WIRE
(Click here)

6. CHECK AUTOMATIC TRANSMISSION SYSTEM
(Click here)
← REASSEMBLY (from Jan 2015)INSTALLATION (from Jan 2017) →