2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  1. A093602E02
    Measure the resistance between the terminals.

    Standard resistance:
    6.9 to 7.9 Ω at 20°C (68°F)

    If the result is not as specified, replace the oil control valve.

  1. A099422E01
    Connect the battery's positive (+) lead to terminal 1 and negative (-) lead to terminal 2, and check the movement of the valve.

    Specified condition:
    Condition
    Specified Condition
    Battery positive (+) voltage is applied
    Valve moves in left arrow direction shown in illustration
    Battery positive (+) voltage is cut off
    Valve moves in right arrow direction shown in illustration

    If the result is not as specified, replace the oil control valve.

    NOTICE:
    If the valve cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be output.

← REMOVAL (from Jan 2015)INSPECTION (from Jan 2015) →